Hawk 2 RTF 1m DLG with Servos Installed

Really great 1m DLG. Bought it as a replacement for my ELF (which are basically out of production at present). It’s a little heavier I think - it holds more speed but with flaperons you can camber it nicely. Still fine tuning it but it’s a fantastic model, great build quality. Maiden I had a couple light launches, tweaked the CG and gave it a decent launch for a 19minute 53second flight. That tells you about all you need to know - not bad!

I purchased the RTF carbon layup version. It is well packaged to protect from any bumps in the delivery.

This came with the CHA DS06 servos pre installed along with all control surfaces set up. Pretty much install receiver, battery, attach wings and tailplane then balance and fly! I fitted a decased Spektrum AR410 which only just fits in the nose. The battery (1s lipo 300mah) fits just behind the servos to get a perfect CofG. Comes in at 136grams with this configuration.

It is very well finished, stunning looking machine.

Easy to launch high, it does like to be kept a bit of speed compared to other 1m dlgs like the mini dart 2 and can feel a little twitchy in comparison but that works to it's favour to make tight turns to keep in light lift and precision flying.

Nothing new, same old "fantastic service"!!!! Very well packed and arrived in perfect condition and fast. You can't go wrong with this company!! Numerous purchases have all been A1 service.
Kerry

Bought as I needed something to replace my elf, absolutely beautiful, built superbly, am very impressed. Usual superb packaging and quick delivery. This is why we use Hyperflight

I already have a Hawk SC Layup that I got in kit form from Hyperflight, and that was a great, if not challenging from a space point of view, DLG kit to learn on.

I’d seen these ARTF versions in stock before, so went for a Glass Layup version as a nice backup to my carbon Hawk and maybe something for slightly windier days.

It’s beautifully finished, as per my review title, all servos setup correctly, pushrods the perfect length, throwing blade installed with no excess epoxy and control horns straight and true. It’s certainly showed me where I could have done better with my build!

It took me longer to install the Rx (a FrSky GXR6 Vario in my case) and programme the radio than it did to assemble it.

I do think the servo stack could be slightly further forward than it is on my model, it leaves enough room for either the Rx or a small battery in the nose, but not both, so you end up fitting something rear of the servos as a result. I’ve got the 1s 600mAh battery rear of the servos, wouldn’t fit up front, although still forward of the CofG, and the Rx and lead weight in the nose. All up flying weight on mine in that configuration is 155g. I could have gone for a smaller battery, but think the lead weight required in the nose would have been higher, so turned it into extra battery instead.

As a comparison, my SC Hawk with an RX4 Rx is 118g all up, still with a few grams of lead in the nose.

It was a slightly windier day than ideal for a maiden today, but I have to say it flew beautifully with the CofG at 55mm, and I was getting 35m launches with very little effort with the controls setup as per the guide above.

The HiTec servos in my version all work very well, and return to centre as you’d expect, so overall very pleased and would heartily recommend these ARTF versions, great fun to fly.

Excellent product delivered very quickly and well packaged

Wow, ordered on the weekend and arrived the following Thursday in Central Queensland, Australia. Model was well packaged and arrived in perfect condition. A beautifully made model that I am really looking forward to flying. Many thanks to Neil at Hyperflight.

Small, light, easy to set up, and flies well.

Been away from flying for a while, and wouldn't have known how to finish this feather-light mini-dlg. If I had, maybe I would have moved the servos half a centimetre for my gear, but hadn't heard of KST, ever seen a spring-pull tail surface, or the mounting details. My last model was a Pike F3J.

This is a great little DLG, it will launch 25-30m with just a 180 degree flick of the arm and once airborne it telegraphs turbulent or rising air well. I've had 10 minute flights in light, early spring thermals. In light winds it's very benign and can be easily slowed down making it a relaxing experience all round. I tend to avoid moderate winds as things happen a bit too quickly for my skill level with this little plane. Having all the servos & control lines/rods fitted saves a tone of head scratching as well as time. A big thumbs up from me.

Thanks Neil for the speedy service. Received safely in a beautifully packaged box in AUSTRALIA after 3 days expedited shipping means. Amazing finish, purchased RTF with KST 06 servos. Had to adjust the LH servo horn mechanically however everything else was perfect! Spektrum 6ch rx (case off) and Dualsky 1s300 lipo in the nose got the cofg perfect. I set it up on a IX14 radio, with loosely following setting recommendations via your page. Needed some up elevator trim for the programmed launch setting, and down elevator for spoiler setting. All sorted with ease inside the flight mode setups. Specked it out on the 8th launch once setup was feeling perfect. A great DLG, I highly recommend this glider and purchasing from Hyperflight!

Thanks Neil for the speedy service. Received safely in a beautifully packaged box in AUSTRALIA after 3 days expedited shipping means. Amazing finish, purchased RTF with KST 06 servos. Had to adjust the LH servo horn mechanically however everything else was perfect! Spektrum 6ch rx (case off) and Dualsky 1s300 lipo in the nose got the cofg perfect. I set it up on a IX14 radio, with loosely following setting recommendations via your page. Needed some up elevator trim for the programmed launch setting, and down elevator for spoiler setting. All sorted with ease inside the flight mode setups. Specked it out on the 8th launch once setup was feeling perfect. A great DLG, I highly recommend this glider and purchasing from Hyperflight!

Had a new RTF Hawk sitting in the box for a couple of years and decided to set it up and give it a shot...It had the BB101 servos in there and they would not center properly...After one flight I shelved it and ordered 4 KST 06 servos for it...I yanked the 101's out with pliers and held them till they were over the trash can and dropped them in....I cut some of the pushrod and string tubing away, installed the KST's, and now I have a nifty flying Hawk!!

I bought mine a couple of years ago, and even though a beautiful glider, I was unlucky to buy mine with the terrible Blue Bird servos installed. With lots of effort to rectify friction in the aileron push rods which made centering worse, it was very strange to fly, when the servos wouldn't centre properly, which in the end I experienced a stall and dive to the ground. The fuselage snapped in half. Very disappointing as the whole point of the RTF is that it should fly correctly out of the box. Those who buy one now are lucky because you'll have the KSTs installed. So my route into the full carbon 1m DLG experience is a very expensive and disappointing one.

A beautiful little plane. Ordered Monday, arrived safely Wednesday and finished today. Struggled to get the MPX RX 5 slim in as rudder servo was restricting space. Discussion with Neil suggested that I'd probably be o.k sans rudder, so out came the rudder servo. Perfect fit now for battery, the three remaining servos and the Rx. Needed 10 Gms of ballast to balance at 55 mm behind L/E. Very thin strip of carbon fixed into rudder hinge slot prevents rudder movement, after removal of torsion spring. Looks so smart, can't wait to get it flown. Looking at Neil's front page support banner for Ukraine makes me so sad, all this lovely engineering comes from the various cottage industry there. I have lots of Ukrainian friends built of over many years of free flight modelling adventures. I will leave you with tonight's response from friend Vasyl in besieged Kharkov " Dear Gary. Yes, we're alive. We are scared but brave. Still on line to talk to the world. For now anyway". Pray for them all, please.

Gary M.

Nicely built dlg, goes together well. Needed 20g of lead in nose to balance, servos could have been installed further forward to help this so not great and aileron servos don't centre very well as tubes seem sticky.

Flys well, but, would be better without the extra nose weight.

Great service well packed came without battery so I emailed and battery came next day . Very impressed with overall quality. Just need to fit my receiver and get out there . Can't wait.....

As the other reviews state, the packaging and shipping are second to none. The servos are installed and placed properly. Linkages are all set up except for the rudder and it's 90% there. One thing is a bit tricky, the loop on the elevator pull wire is inside the opening of the fuse. Without being told this it appears you need to pull the servo and set up it up again.. DON"T DO THAT! I almost did until Neil set me straight. (very patient guy by the way) pull it out with a little hook or something and you will understand. Over all the pre build on this is very good.
It is a DLG and the fuse is very small. Be mindful ordering batteries and use a micro receiver. I had to add alot of weight, 10gr, to get it to balance.

Overall the build quality is A1,. hard to wrong with this DLG

I am based in Southern California and I ordered this DLG as soon as it came back in. Glider arrived very quickly and extremely well packed with no damage. Installation of servos and control lines was really helpful as this has such a tiny space for all the electronics. Highly recommend this supplier they are great to work with and very careful in ensuring the safety of their products during shipping. Haven't flown it yet but hopefully this weekend!

Excellent packaging and delivery. On assembly slight niggle with ailerons not centering. Modify pushrod for better alignment. Very nice DLG, superb flyer.

Excellent packaging and superb quality... Easy to assemble waiting for some good weather.. Thanks Neil.

What a superb little dlg. Excellent construction
Prompt delivery with great packaging. Servo failed but Neil replaced no problems.

First encounter with a 'proper' DLG. Was attracted to the Hawk because it was complete, no building required. This was a great way for me to see how it was to be done, without the worry of having to improvise with a kit, now there is a great reference to see how best practice looks, much more confident in purchasing a kit now.
The Hawk is beautiful finished, everything wanted. A great size for keeping in the van, wonderful fit and finish. Graphics are great and very helpful as the underside flashes are very different to the upper surface design, orientation will be much improved over the plain all over colours I'm used to. As a relative newcomer to DLG, the overall experience is of a plane that will be a cherished. Not had a flight yet, waiting for conditions to be better for initial set up, confidence is high.

Neil is a cracking chap and a joy to ask questions to, none of the monosyllabic yes or no answers many of us have become accustomed to. A passionate and knowledgable man who clearly has probably forgotten more that I know. It's a comfort to purchase from a person who has such knowledge and passion for his products. Never once felt like a pest for asking questions and feel confident I could ring and ask anytime and he would very likely be interested and motivated to put me on he right track. Highly recommended, wonderful plane and a special buying experience that will lead to a long time association for sure. Thank you Hyperflight.

Bought another carbon RTF Hawk as a back-up ship....Arrived well boxed and undamaged, as expected from Neil...Red on carbon, on top of wing...Bright green stripes underneath....All set up now ready for service when called upon!!!

Flight report on our two glass Hawks.....CG 55mm...They seem to fly just as well as the carbon jobs, although the carbon ship hangs a little better in the heat above the grass...This next week I'm gonna fly it along the small sand berm on the beach in Huntington Beach, CA...Should be good!!!

Our two glass Hawk RTF's were shipped from England on a Thursday and arrived in our grubby hands in the USA mid-day the following Monday, boxed beautifully and in excellent shape...The SD100 servos in these are larger than the BB101's in our carbon jobs, so the AR 410 receivers have been de-pinned and servo lines soldered directly to the board...That big goofy capacitor was taken off the receiver board and epoxied behind the servos, under the wing area, with a couple of lines running to it...The receiver board fits nicely on top of the front servos with the battery in front of that, in the nose, and the balance is spot on!!...Waiting for better weather here to have a fling!!...Thanks again Neil

The build quality of the model was great. Unfortunately, when my Hawk arrived the package had been smashed and the fuselage was broken and the wing was dented by the same event. I was able to repair the fuse and Neil offered to give me a partial refund. His customer service and support after shipment was great despite the challenging situation.

Ordered two carbon Hawk RTF ships....Got here to the USA in under a week and boxed nice...no damage...Came with the HyperFlight 150mah NiMH battery which fit nicely in the nose...We (My girlfriend and I) are using Spektrum AR410 antenna-less receivers with the covers off, which fit nicely behind the servos and halfway under the leading edge of the wing...balanced nicely at 55mm from leading edge without any additional weight...These things are perfect for the small parks and schoolyards we have around here and they thermal very well, especially the low level heat coming off the grass!!...I ordered two more RTF ships, glass ones this time, to fly the beach and small slopes and cliffs along the shoreline, as well as our local RC field where there isn't any grass, so as not to scratch or ding up the beautiful carbon jobs, which are "Grass only" flyers!!....These things are a blast, we are having too much fun!!!....Thanks Neil